Fence Painting or Staining 101: A DIY Guide

Posted by on May 12, 2017 in Home Remodeling |

A fence is an attractive addition to any property. It does the dual job of acting as a boundary and improving the appearance. Painting or staining the walls protect them from deteriorating elements and help them last longer. Rail coloring is hard work; you may hire a fence painting company if you do not want to do it yourself. To hire a fence painting professional is an excellent choice, but if you want to do it yourself, then this article is for you.

Fence Painting or StainingHere is an easy guide to assist you in painting and staining fences.

How to Begin

You can lower difficulty level of painting the walls by making the preparations before you start. You need to gather the right supplies before time to make sure that you do not have to run halfway through the job. The materials include sufficient amount of paint and primer, good quality brushes and something to save ground from paint splatters.

How to Prepare a New Fence

Fence service professional recommends painting a new wall before installing it which makes the paint job easier. It doesn’t mess your grass or floor and keeps everything cozy. You need to apply primer and give it enough time to dry on the railing before painting or staining it.

How to Prepare an Existing Fence

For fences which are pre-installed, you need to clean them before preparing them to paint or stain. Remove old cobwebs, leaves or anything else stuck in the railing and scrub down the mess. After a wash, an appropriate time needs to be given to the fence. Remove the old paint with the help of a brush wire as it will save the new paint to peel off from the wall prematurely.

Choosing the Day for Fence Painting

The right weather is a necessity to paint or stain the fences. Only if the paint dries, it will give the best result possible. You should choose a dry day for applying color, a day when there is no rain, and there is no forecasting of a storm later that day. Direct sunlight can affect the paint, so you need to color in the early morning or the late evening. Painting at these times ensures that the paint can dry evenly without any effects from direct sunlight.

The Painting Process

It is best to work in a pair with both the person painting the fence at the same time from opposite sides. Pairing helps to ensure that there are no lines or lumps from painting over the vertices. You need to brush from the top to bottom board. After one section finishes, shift the ground cover to the next section and start again. Paint the top edge, facing side, the other end, and bottom edge respectively. You may use a hand roller for a flat board.

With these tips, painting any fence can become a simple task. Homeowners who may have questions about primer and paint types can check with a fence painting company for information.